Evaluate the record of data from the additional fields of the process product: Height, Width, Length, Actual weight in the block Parameters of each place of departure
Evaluate the record of data from the additional fields of the process product: Height, Width, Length, Actual weight in the block Parameters of each place of departure
Leave a message in this thread and the user's contacts will be shown to you
Briefly, what is needed:
[file]21221[/file]
[file]21222[/file]
- record data from additional fields of the process product: Height, Width, Length, Actual weight in the Parameters block of each place of departure
[file]21221[/file]
[file]21222[/file]
This is necessary in order not to transfer data manually every time.
[file]21221[/file]
[file]21222[/file]
Please tell me how to do it on the existing functionality?
[file]21221[/file]
[file]21222[/file]
If there is no ready-made solution, then evaluate the following modification:
[file]21221[/file]
[file]21222[/file]
1. We may have several products in the task
[file]21221[/file]
[file]21222[/file]
2. Each product has its own dimensions and actual weight
[file]21221[/file]
[file]21222[/file]
3. We write the dimensions and weight in the additional fields of the product of the process
[file]21221[/file]
[file]21222[/file]
4. It is necessary to automatically transfer the dimensions and weight values to the corresponding fields of the interface block: Parameters of each place of departure
[file]21221[/file]
[file]21222[/file]
[file]21221[/file]
[file]21222[/file]
[file]21221[/file]
[file]21222[/file]
Briefly, what is needed:
- record data from additional fields of the process product: Height, Width, Length, Actual weight in the Parameters block of each place of departure
This is necessary in order not to transfer data manually every time.
Please tell me how to do it on the existing functionality?
If there is no ready-made solution, then evaluate the following modification:
1. We may have several products in the task
2. Each product has its own dimensions and actual weight
3. We write the dimensions and weight in the additional fields of the product of the process
4. It is necessary to automatically transfer the dimensions and weight values to the corresponding fields of the interface block: Parameters of each place of departure
Hello. One product may have different dimensions in an order, as far as I understand? Now this works, but only takes from the basic dimensions of the product of their new mail unit. If you need to transfer from additional fields of process products, we can do the following - it will take about 2 hours of revision. Bill?
Hello. One product may have different dimensions in an order, as far as I understand? Now this works, but only takes from the basic dimensions of the product of their new mail unit.
If you need to transfer from additional fields of process products, we can do the following - it will take about 2 hours of revision. Bill?
Leave a message in this thread and the user's contacts will be shown to you
Department of Care OneBox production wrote: One product can have different dimensions in the order as far as I understand?
Yes, everything is correct At the same time, it may also be the case that several products have dimensions, and some may be empty
Department of Care OneBox production wrote: If you need to transfer from additional process products
Yes, it is necessary to take the data from the additional fields of the process products, where this data is written, and transfer this data to Nova Poshta, so that it is possible to send several separate places according to the number of products in the process
Department of Care OneBox production wrote: we can do the following - it will take about 2 hours of finishing
Ok, I am waiting for the Client to confirm that he is ready to pay for the work
[quote]
Department of Care
OneBox production wrote:
One product can have different dimensions in the order as far as I understand?
[/quote]
Yes, everything is correct
At the same time, it may also be the case that several products have dimensions, and some may be empty
[quote]
Department of Care
OneBox production wrote:
If you need to transfer from additional process products
[/quote]
Yes, it is necessary to take the data from the additional fields of the process products, where this data is written, and transfer this data to Nova Poshta, so that it is possible to send several separate places according to the number of products in the process
[quote]
Department of Care
OneBox production wrote:
we can do the following - it will take about 2 hours of finishing
[/quote]
Ok, I am waiting for the Client to confirm that he is ready to pay for the work
Legeza Vyacheslav iCOLOR OneBox (FOP LEGEZA VIACHESLAV VALERIANOVYCH) wrote: Yes, everything is correct At the same time, it may also be the case that several products have dimensions, and some may be empty
if empty, what to do?
[quote]
Legeza Vyacheslav
iCOLOR OneBox (FOP LEGEZA VIACHESLAV VALERIANOVYCH) wrote:
Yes, everything is correct
At the same time, it may also be the case that several products have dimensions, and some may be empty
[/quote]
if empty, what to do?
Leave a message in this thread and the user's contacts will be shown to you
Department of Care OneBox production wrote:
Legeza Vyacheslav iCOLOR OneBox (FOP LEGEZA VIACHESLAV VALERIANOVYCH) wrote: Yes, everything is correct At the same time, it may also be the case that several products have dimensions, and some may be empty
if empty, what to do?
It means to transfer as a place, but without filling dimensions and weight
[quote]
Department of Care
OneBox production wrote:
[quote]
Legeza Vyacheslav
iCOLOR OneBox (FOP LEGEZA VIACHESLAV VALERIANOVYCH) wrote:
Yes, everything is correct
At the same time, it may also be the case that several products have dimensions, and some may be empty
[/quote]
if empty, what to do?
[/quote]
It means to transfer as a place, but without filling dimensions and weight
Leave a message in this thread and the user's contacts will be shown to you
Department of Care OneBox production wrote: then you will receive an error from the new mail "you sent bullshit, think again and the dimensions are filled"
How will it be right in this case? As I see it: 1. In the product card, we must indicate the dimensions of the product: height, width, length, weight. 2. Copy this data into additional fields of the process product. 3. Transfer this data to Nova Poshta. True? But in this case, we may face the problem that for most products we specify the dimensions manually in the task, and they should not be overwritten with data when copying from the product card. How to avoid this problem?
[quote]
Department of Care
OneBox production wrote:
then you will receive an error from the new mail "you sent bullshit, think again and the dimensions are filled"
[/quote]
How will it be right in this case?
As I see it:
1. In the product card, we must indicate the dimensions of the product: height, width, length, weight.
2. Copy this data into additional fields of the process product.
3. Transfer this data to Nova Poshta.
True?
But in this case, we may face the problem that for most products we specify the dimensions manually in the task, and they should not be overwritten with data when copying from the product card.
How to avoid this problem?
[quote]
Legeza Vyacheslav
iCOLOR OneBox (FOP LEGEZA VIACHESLAV VALERIANOVYCH) wrote:
[quote]
Department of Care
OneBox production wrote:
Issue an invoice?
[/quote]
Please issue an invoice
[/quote]
[Department of Care #82] I am waiting for the bill
You need to set some default dimensions in the action, which will be added if they are not specified in your process product. I assigned the task to the account
You need to set some default dimensions in the action, which will be added if they are not specified in your process product. I assigned the task to the account
Leave a message in this thread and the user's contacts will be shown to you
Care Department OneBox production wrote: You need to set some default dimensions in the action, which will be added if they are not specified in your process product. I assigned the task to the account
Tell me, if there will be a rakhunok?
[quote]
Care Department
OneBox production wrote:
You need to set some default dimensions in the action, which will be added if they are not specified in your process product. I assigned the task to the account
[/quote]
Tell me, if there will be a rakhunok?
Leave a message in this thread and the user's contacts will be shown to you
Department of Care OneBox production wrote: pingona tomorrow, if they don't deliver
push whoever you need, please it seems that the person responsible for invoicing is not interested in getting paid)))
[quote]
Department of Care
OneBox production wrote:
pingona tomorrow, if they don't deliver
[/quote]
push whoever you need, please
it seems that the person responsible for invoicing is not interested in getting paid)))
Department of Care OneBox production wrote: pingona tomorrow, if they don't deliver
push whoever you need, please it seems that the person responsible for invoicing is not interested in getting paid)))
Paid by invoice Please guide me by the terms so that I can report to the Client Department of Care
[quote]
Legeza Vyacheslav
iCOLOR OneBox (FOP LEGEZA VIACHESLAV VALERIANOVYCH) wrote:
[quote]
Department of Care
OneBox production wrote:
pingona tomorrow, if they don't deliver
[/quote]
push whoever you need, please
it seems that the person responsible for invoicing is not interested in getting paid)))
[/quote]
Paid by invoice
Please guide me by the terms so that I can report to the Client
[Department of Care #82]
Action Calculate and record information on places of departure in the Product parameters block for Novaya Poshti in it settings https://tppr.me/L4aVb select all 4 additional ones. fields and check the box if needed.
Action
Calculate and record information on places of departure in the Product parameters block for Novaya Poshti
in it settings https://tppr.me/L4aVb select all 4 additional ones. fields and check the box if needed.
Leave a message in this thread and the user's contacts will be shown to you
Department of Care OneBox production wrote: Action Calculate and record information about places of departure in the Product parameters block for Novaya Poshta in it settings https://tppr.me/L4aVb select all 4 add. fields and put a tick if necessary.
Thank you sincerely, I check how it works there is an additional question about the use of the action I understand correctly that I can run it only after the Automatically create TTN action?
[quote]
Department of Care
OneBox production wrote:
Action
Calculate and record information about places of departure in the Product parameters block for Novaya Poshta
in it settings https://tppr.me/L4aVb select all 4 add. fields and put a tick if necessary.
[/quote]
Thank you sincerely,
I check how it works
there is an additional question about the use of the action
I understand correctly that I can run it only after the Automatically create TTN action?
I understand correctly that I can run it only after the Automatically create TTN action?
It seems that he made a significant mistake with the logic, because he gives an error in such a sequence.
When the action is placed before the creation of TTN, everything works
Thank you sincerely
[quote]
[file]21274[/file]
Legeza Vyacheslav
[file]21274[/file]
iCOLOR OneBox (FOP LEGEZA VIACHESLAV VALERIANOVYCH) wrote:
[file]21274[/file]
I understand correctly that I can run it only after the Automatically create TTN action?
[file]21274[/file]
[/quote]
[file]21274[/file]
It seems that he made a significant mistake with the logic, because he gives an error in such a sequence.
[file]21274[/file]
When the action is placed before the creation of TTN, everything works
[file]21274[/file]
Thank you sincerely
[file]21274[/file]
[file]21274[/file]
[Department of Care #82]
it is very similar that it gives an error in connection with this modification
although I could be wrong
Here is the topic that I posted
https://1b.app/ua/forum/integrations-with-delivery-services/17743-koli-stvoryuiemo-ttn-vidaie-pomilku-must-be-one-optionsseat/
Please join the conversation. If you have something to say - please write a comment. You will need a mobile phone and an SMS code for identification to enter.
Log in and comment
Donate
You don't have enough funds in your account Top up