1b.app
Link copied -

Finish revision 2

Evaluate the finalization of the block. Add informative indicator % Markup and Margin
https://prnt.sc/zbmf69 is enabled in the block settings by ticking https://prnt.sc/zbmouu
Well, the Margin is calculated as Wholesale Price Level - Incoming Price
Markup % = Margin/Input price. Numbers are not editable. Whole numbers, no tenths. The first block reduces the quantity the most, and the last markup % is the smallest. Margin is slightly less than Cost.
This will enable us to form prices more efficiently. I’ll clarify that the indicator is calculated per unit and not per batch (you might think)
https://prnt.sc/zbn6f5
for one unit, also calculate the indicator https://prnt.sc/zbnsyr
I found https://prnt.sc/zbqubi that when adding price levels, the block began to expand, this was not the case before, and this greatly interferes with the structure of the Product Card. If this is the desired function, then why does it add as many lines as I filled in the card. It is reasonable that it should al
Original question is available on version: ru

Answers:

Hello.
1. Add 2 such speakers with 4h settings. https://prnt.sc/zbnsyr I didn’t understand here, do you want the margin / markup to be calculated for wholesale prices and for regular prices?
2. You can make a field in the block settings in which you will enter the number of empty lines that you need. Takes 1 hour.
17.02.2021, 17:24
Original comment available on version: ru

point number 2 now issue an invoice.
on the first one a little later, but on the data output, this is the Mark and the margin were shown for all price levels, both for 1 piece and for wholesale. It is necessary to navigate the formation of the markup. the indicator for wholesale is exported for 1 unit when buying from a wholesale quantity. those. pricing example https://prnt.sc/zy4ogz
18.02.2021, 09:14
Original comment available on version: ru

Accepted, invoice for item 2. We will wait for your answer on the first one. Have a good day.
18.02.2021, 10:48
Original comment available on version: ru

on the first questions is what you need to get in the end?
18.02.2021, 10:50
Original comment available on version: ru

no, I get it. For the price level and the price level relative to the quantity of goods, you need 2 additional indicators that will be calculated automatically.
18.02.2021, 10:55
Original comment available on version: ru

https://prnt.sc/zyjukh
Margin amount and % are simply calculated by price levels.
I specified only because they did not make a margin for an order of 5 pieces, for example, by multiplying it by 5.
The price level is indicated for 1 piece when buying more than 5 pieces. Here we need indicators of this price level simply.
I'd better clarify again than later I will pay again for the revision of this revision :)
it's just basically
18.02.2021, 11:22
Original comment available on version: ru

https://prnt.sc/zymbm6 in the end it will be like this, right?
18.02.2021, 11:40
Original comment available on version: ru


Bilbo Baggins
cracker wrote:
https://prnt.sc/zymbm6 in the end it will be like this, right?

Yes, Margin amount, markup %.
Submit an invoice
18.02.2021, 17:15
Original comment available on version: ru

Good afternoon. Both items are uploaded to your box, you can customize.
24.02.2021, 12:07
Original comment available on version: ru

in general, the norms, only I overlooked that now if the product does not have Wholesale prices, but it is shown like this https://prnt.sc/105kqfk
and I need 5 fields to be static as without this setting, and when you fill them in, one more is added. Please rate this change.
24.02.2021, 12:30
Original comment available on version: ru

Dmitry, then it turns out you need a combination of settings:
1. The setting that is now, which adds the required number of empty lines (make it work only if there are price levels depending on the number)
2. New setting, with the number of empty lines in case you don't have any price levels.
So? Takes half an hour
24.02.2021, 13:00
Original comment available on version: ru

issue an invoice.
I just didn’t specify the request initially, I have the appearance of the product card set up under the standard set of rows, and when there are more/less of them, everything goes astray, and each time it takes extra time to search for indicators
24.02.2021, 13:10
Original comment available on version: ru

once again I will describe the requirement: Initially, there are 5 price levels in the block, I need that until I fill in all 5 new lines do not appear and the block has 5 price levels (even if 2-3-4 from the bottom are filled, the block has only 5), when filled all 5 then an extra line for the price level appeared.
It is important that it be statically 5 and increase only when all 5 price levels are filled
24.02.2021, 13:14
Original comment available on version: ru

yes i understand what you want
24.02.2021, 13:22
Original comment available on version: ru

I made a payment, I'm waiting for the revision
26.02.2021, 14:33
Original comment available on version: ru

payment has arrived. The revision will most likely be completed on Monday or Tuesday
26.02.2021, 14:37
Original comment available on version: ru

please correct the column ratio, with a large screen display format, the price field goes into obscurity, here is an example
https://prnt.sc/107mfso - 90% scale
https://prnt.sc/107mh5i - 100% scale is already no price, although there is enough display space
I think the problem is clear
26.02.2021, 15:41
Original comment available on version: ru

I see, thanks - I'll fix it together with the revision that was discussed above
26.02.2021, 15:42
Original comment available on version: ru

Good afternoon. Added new setting and minimum width for margin.
04.03.2021, 15:38
Original comment available on version: ru

https://prnt.sc/10dh6r3 - 100% increase still price suffers with increase while other columns have a lot of space
05.03.2021, 08:59
Original comment available on version: ru

Please give a link to the product from which the screen
05.03.2021, 16:05
Original comment available on version: ru

it does not depend on the product, in any product this
https://vmk.crm-onebox.com/admin/shop/products/36096/edit/
05.03.2021, 19:30
Original comment available on version: ru

There, just what does not decrease when scaling is the quantity field, and in it there are only 1-2 rarely 3 characters, and the price there is 3-5 characters mostly.
05.03.2021, 21:23
Original comment available on version: ru

Fixed. Refresh the page with ctrl+f5 to clear the cache.
12.03.2021, 17:56
Original comment available on version: ru


Gimli son of Gloin
dwarf wrote:
Fixed. Refresh the page with ctrl+f5 to clear the cache.

Thanks
12.03.2021, 18:54
Original comment available on version: ru

Please join the conversation. If you have something to say - please write a comment. You will need a mobile phone and an SMS code for identification to enter. Log in and comment