New mail - default number of places 1

It's not entirely clear what the problem is? From what I see, you just need to put down the number of places by default, and fill in the dimensions in the product card

The fact is that now the logic of work is excellent. But, you need to make logic for some counterparties Is it possible to implement that at the same time - ttn created for the number of seats 1? - the type of departure DV / P and tp set from the dimensions of the goods? [quote] Sukhanitsky Andrey OneBox Corp. Integrator wrote: It's not entirely clear what the problem is? [/quote] The only problem is that the post office decided to add the cost of the box to each new place (2 or more places) [quote] Sukhanitsky Andrey OneBox Corp. Integrator wrote: From what I see, you just need to put down the number of places by default, and fill in the dimensions in the product card [/quote] Dimensions are filled in some products. It makes no sense to do it in all products, because the default parameters do a great job with these products. The number of seats is specified in the integration by default 1 (I also tried to pull the number of seats from the additional field). If we add several oversized goods to the process, we will get a TTN for several places. We want to always create one place and consider the type of departure from the dimensions. Is it possible to implement that at the same time - ttn created for the number of seats 1? - the type of departure DV / P and tp set from the dimensions of the goods?

[quote] Vysokos Nikolai Aleksandrovich wrote: If we add several oversized goods to the process, we will get a TTN for several places. We want to always create one place and consider the type of departure from the dimensions. [/quote] Does anything bother you about this proposal? Perhaps I misunderstand the description of the task, but it looks like a paradox, because if the goods are larger than one place, then it will not fit in it. Even if you transfer 1 place, as it works now, but your dimensions do not fit in one place, then the NP will automatically change the number of places when creating a TTN [file]13626[/file] and the volumetric weight is calculated automatically by dimensions, or the same is considered inside the box, if you change the request, but this is almost the same thing, the box also considers it in size. What is a shipment type? There is no such field in the api, although their description is not very good. Explain in more detail what needs to be done?

[quote] Sukhanitsky Andrey OneBox Corp. Integrator wrote: [quote] Vysokos Nikolai Aleksandrovich wrote: If we add several oversized goods to the process, we will get a TTN for several places. We want to always create one place and consider the type of departure from the dimensions. [/quote] Does anything bother you about this proposal? Perhaps I misunderstand the description of the task, but it looks like a paradox, because if the goods are larger than one place, then it will not fit in it. Even if you transfer 1 place, as it works now, but your dimensions do not fit in one place, then the NP will automatically change the number of places when creating a TTN [file]13626[/file] and the volumetric weight is calculated automatically by dimensions, or the same is considered inside the box, if you change the request, but this is almost the same thing, the box also considers it in size. What is a shipment type? There is no such field in the api, although their description is not very good. Explain in more detail what needs to be done? [/quote] Type of departure (cargo parameters) DV - dribny vantage P - posilkovy There seems to be more / V - vantage DV - set if none of the sides of the dimension does not exceed 35cm. If one of the sides is 36cm and above - put P Previously: we calculated the volumetric weight + indicated the type of shipment from the dimensions. If there are several goods, put several places. The IR has changed the conditions of the seats, and there will be an additional charge for each new seat. Therefore, we want to fit the maximum number of goods in one place. If we have in the order two products 34cm wide, 15cm long and 2cm high. They will create either 2 places for us, or put 1 place with the letter P. Although, in fact, we can put it in length and the package exchanges will be 34cm x 30cm x 2cm I mean, can we indicate the places ourselves? Calculate the type of shipment yourself by the dimensions of the goods?

NP comment: "Purchases" - the administration of a carload of no more than 30 kg (actual chi volumetric vag) [4]. Dribne administration - ce administration by actual or volumetric weight up to 1.5 kg inclusive, and with the found side no more than 35 cm [1, 2, 3, 8, 9] Baggage (П) - tse dpravlennya actual or volumetric carton up to 30 kg inclusive, the other side found in the package is no more than 120 cm, and the skin on the other side is not more than 70 cm, packed in a corrugated cardboard company or in a repackaged box :

Now: - "Use volumetric weight instead of dimensions when creating TTN (only api request changes)" - enabled - When sending TT, send the dimensions of each product separately - enabled There is an example of a product https://rivcont.info/app/product/3943/edit/ The volumetric weight is 0.9kg, by weight it is DV (mk less than 1.5kg), but the length of this product is 37cm - it should be P (mk more than 35cm)

Didn't the NP tell you how to transfer this type to them via api?

[quote] Sukhanitsky Andrey OneBox Corp. Integrator wrote: Didn't the NP tell you how to transfer this type to them via api? [/quote] No, I wrote to support

[quote] Sukhanitsky Andrey OneBox Corp. Integrator wrote: Didn't the NP tell you how to transfer this type to them via api? [/quote] Vantage dimensions You pass in the "OptionsSeat" array and specify the parameters of the skin side "OptionsSeat": [ { "volumetricVolume": "10", "volumetricWidth": "10", "volumetricLength": "10", "volumetricHeight": "10", "weight": "10" } Field "CargoType" You will fill in the name of the document, but when creating an Internet document, the system will automatically correct for the type of your shipment. The warning about this is fixed at "warnings".

[quote] Vysokos Nikolai Aleksandrovich wrote: Field "CargoType" You will fill in the name of the document, but when creating an Internet document, the system will automatically correct for the type of your shipment. The warning about this is fixed at "warnings". [/quote] Well, they automatically put down the type of cargo based on the size. Refinement won't do anything.

So with the settings enabled: - "Use volumetric weight instead of dimensions when creating TTN (only api request changes)" - enabled - When sending TT, send the dimensions of each product separately - enabled Something does not work correctly, because the example of the product https://rivcont.info/app/product/3943/edit/ The volumetric weight is 0.9kg, by weight it is DV (mk less than 1.5kg), but the length of this product is 37cm - it should be P (mk more than 35cm) In theory, we do not transmit data on the longest side / dimensions of products. If we pass, throw off an example of a request and a response in order to write to the support of the NP and deal with this problem

[quote] Vysokos Nikolai Aleksandrovich wrote: - "Use volumetric weight instead of dimensions when creating TTN (only api request changes)" - enabled [/quote] if you enable this setting, then the dimensions of the product will not be transmitted, disable

[quote] Sukhanitsky Andrey OneBox Corp. Integrator wrote: [quote] Vysokos Nikolai Aleksandrovich wrote: - "Use volumetric weight instead of dimensions when creating TTN (only api request changes)" - enabled [/quote] if you enable this setting, then the dimensions of the product will not be transmitted, disable [/quote] If we disable this functionality, we start counting the amount of space. And we want there to be 1 place everywhere

[quote] Vysokos Nikolai Aleksandrovich wrote: If we disable this functionality, we start counting the amount of space. And we want there to be 1 place everywhere [/quote] When the checkbox is enabled, volumetric weight is transferred instead of dimensions. If you want to transfer dimensions, then you need to turn it off. The number of seats can be specified. You can't have one place if the dimensions of the goods do not fit in it.

[quote] Sukhanitsky Andrey OneBox Corp. Integrator wrote: [quote] Vysokos Nikolai Aleksandrovich wrote: If we disable this functionality, we start counting the amount of space. And we want there to be 1 place everywhere [/quote] When the checkbox is enabled, volumetric weight is transferred instead of dimensions. If you want to transfer dimensions, then you need to turn it off. The number of seats can be specified. You can't have one place if the dimensions of the goods do not fit in it. [/quote] They sent us an example. We can transfer both volumetric weight and dimensions. "volumetricVolume": "10", "volumetricWidth": "10", "volumetricLength": "10", "volumetricHeight": "10", "weight": "10" First option Now it works: When the checkbox is enabled, volumetric weight is transferred instead of dimensions. + with this checkbox sets the number of places to 1 everywhere, regardless of the counted volume. We can finalize or correct the setting for this checkbox to transfer past the volumetric weight - dimensions, because in addition to the volumetric weight, you still need to look at the longest side side no more than 35 cm" Or the second option: "If you want to transfer the dimensions, then it must be turned off." In this case, a new place is added for each product where the dimensions are filled. Let's refine the logic then, where it counts the dimensions of the products and correctly lays them out. If the maximum side is 35cm for DV type. For example, there are two products First product: W7xH3xD25 Second product: W7xH5xD15 The system should not create a new place for each product. We can send this package with the DV type, because we put the products in height, then the general parameters of one place will be 7 in width, (3 + 5 cm) in height 8, and in length (along the longest side) 25, the total will be volumetric weight of DV and dimensions of DV Or First product: W7xH3xD37 Second product: W7xH5xD15 In terms of volumetric weight, it will be DV, but in terms of dimensions, no matter how we put them, it will be P (mk 37cm), but we will send this package in one place, you do not need to send dimensions separately for each product

Can we improve any of this? To correct ?

Waiting for OS from technical specialists

Can we find a solution and an estimate in the near future ?

Moved topic to paid support Forum topic can be closed