Copy process product fields instantly
http://crm.mebelok.com
Before updating to the new version, there were 2 additional products in the product table. process product fields, the procedure for copying from field 1 to field 2 is configured
When we wrote the value in field 1 in the table, it immediately copied it to field 2, without clicking on save
After the update it stopped working, tell me how to return or what is needed for this
Original question is available on version: ru
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Before updating to the new version, there were 2 additional products in the product table. process product fields, the procedure for copying from field 1 to field 2 is configured
When we wrote the value in field 1 in the table, it immediately copied it to field 2, without clicking on save
After the update it stopped working, tell me how to return or what is needed for this
Answers:
Hello, you have a custom branch. Merged mvp into it - try it.
15.12.2020, 18:45
Original comment available on version: ru
Bodyako Dmitry
Employee wrote:
Hello, you have a custom branch. Merged mvp into it - try it.
Checked, didn't help.
22.12.2020, 11:59
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Original comment available on version: ru
As a result, it still does not work, it worked before the upgrade to mvp. Can you fix it?
22.02.2021, 10:27
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Original comment available on version: ru
give a test example and show which field to fill in and which one should change
22.02.2021, 17:41
Original comment available on version: ru
Bilbo Baggins
cracker wrote:
give a test example and show which field to fill in and which one should change
http://crm.mebelok.com/admin/customorder/realizatsiya-izdeliy/1858044/edit/
I'm adding a sofa - the link box looks like https://prnt.sc/103x30b
Until I save, the link from the card is not copied
You can edit quantity, price and other fields in the table.
22.02.2021, 18:00
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Original comment available on version: ru
in the old version there was a launch of actions and procedures when editing, in the new one there is no
02.03.2021, 00:06
Original comment available on version: ru
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
02.03.2021, 07:27
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Original comment available on version: ru
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
we will not return this due to the fact that it generates a load and loops
02.03.2021, 12:49
Original comment available on version: ru
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
we will not return this due to the fact that it generates a load and loops
And if you modify the setting to run not all procedures, but only selected ones? For example, 2 procedures have been selected and only they will be launched when editing the table. So it is possible?
02.03.2021, 16:02
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Original comment available on version: ru
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
we will not return this due to the fact that it generates a load and loops
And if you modify the setting to run not all procedures, but only selected ones? For example, 2 procedures have been selected and only they will be launched when editing the table. So it is possible?
well that's the solution...
I don't know where to put this setting.
you can also check the box that will run the procedures
but then I am not ready to bear any responsibility for such improvements
03.03.2021, 09:08
Original comment available on version: ru
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
we will not return this due to the fact that it generates a load and loops
And if you modify the setting to run not all procedures, but only selected ones? For example, 2 procedures have been selected and only they will be launched when editing the table. So it is possible?
well that's the solution...
I don't know where to put this setting.
you can also check the box that will run the procedures
but then I am not ready to bear any responsibility for such improvements
Let's do this:
1. In the settings of each BP, modify the checkbox "Run procedures when editing the table of products"
2. If the checkbox is checked, select the procedures to run with the multilist
The setting can be added somewhere here so that you can configure for each PSU https://prnt.sc/10bxn1r
03.03.2021, 09:21
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Original comment available on version: ru
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
we will not return this due to the fact that it generates a load and loops
And if you modify the setting to run not all procedures, but only selected ones? For example, 2 procedures have been selected and only they will be launched when editing the table. So it is possible?
well that's the solution...
I don't know where to put this setting.
you can also check the box that will run the procedures
but then I am not ready to bear any responsibility for such improvements
Let's do this:
1. In the settings of each BP, modify the checkbox "Run procedures when editing the table of products"
2. If the checkbox is checked, select the procedures to run with the multilist
The setting can be added somewhere here so that you can configure for each PSU https://prnt.sc/10bxn1r
no, this is a crutch solution and this setting is not needed there.
03.03.2021, 16:57
Original comment available on version: ru
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
we will not return this due to the fact that it generates a load and loops
And if you modify the setting to run not all procedures, but only selected ones? For example, 2 procedures have been selected and only they will be launched when editing the table. So it is possible?
well that's the solution...
I don't know where to put this setting.
you can also check the box that will run the procedures
but then I am not ready to bear any responsibility for such improvements
Let's do this:
1. In the settings of each BP, modify the checkbox "Run procedures when editing the table of products"
2. If the checkbox is checked, select the procedures to run with the multilist
The setting can be added somewhere here so that you can configure for each PSU https://prnt.sc/10bxn1r
no, this is a crutch solution and this setting is not needed there.
How then can it be improved?
03.03.2021, 16:58
https://qube-soft.com/ crm erp onebox qubesoft внедрение аналитика 1с интегратор
Original comment available on version: ru
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
Korop Vladislav Pavlovich
Employee wrote:
Ustimenko Igor
OneBox CTO wrote:
in the old version there was a launch of actions and procedures when editing, in the new one there is no
I understand, and therefore I ask what is needed in order to return this, it is possible to modify it with a setting.
we will not return this due to the fact that it generates a load and loops
And if you modify the setting to run not all procedures, but only selected ones? For example, 2 procedures have been selected and only they will be launched when editing the table. So it is possible?
well that's the solution...
I don't know where to put this setting.
you can also check the box that will run the procedures
but then I am not ready to bear any responsibility for such improvements
Let's do this:
1. In the settings of each BP, modify the checkbox "Run procedures when editing the table of products"
2. If the checkbox is checked, select the procedures to run with the multilist
The setting can be added somewhere here so that you can configure for each PSU https://prnt.sc/10bxn1r
no, this is a crutch solution and this setting is not needed there.
How then can it be improved?
Why should I make a functional that leads to problems?
we just won't do it
03.03.2021, 17:01
Original comment available on version: ru
Please join the conversation. If you have something to say - please write a comment. You will need a mobile phone and an SMS code for identification to enter.
Log in and comment
Copyright © OneBox 2024
